For some homeowners, remodeling projects are regular occurrences to keep their homes looking fresh. Sometimes, that means smaller changes like a new coat of paint or changing a light fixture. Other times, more substantial changes are needed. Determining those changes can be a challenge, but looking at the potential return on investment is a great way to prioritize.

Bathroom remodeling offers a 68.7 percent return on investment, according to a National Association of Realtors survey. One way to add value to a bathroom remodel is to pick bathroom fixtures that are more efficient than what you currently have installed. Americans are going green in many areas of life, whether with more energy-efficient light bulbs, hybrid cars or by recycling more regularly. Bathroom fixtures are no different.

Here are three reasons why you should consider going green with your bathroom remodeling project:

1. Products may be outdated.

Advertisement

Toilets made before 1994 use anywhere from 3.5 gallons to 8 gallons per flush (gpf), while new EPA WaterSense labeled high-efficiency toilets can work beautifully on a modest 1.28 gpf. Not sure of your toilet’s vintage? Look at the underside of the tank lid — the date of manufacture is often stamped into the porcelain. In the shower, the typical showerhead installed in California homes built after 1994 uses as much as 2.5 gallons per minute. At that rate, your eight-minute shower consumes a whopping 20 gallons of water.

2. Savings to be had. Compared to 3.5 gpf toilets, TOTO’s Aquia One-Piece Dual Flush High-Efficiency Toilet has a flushing system that enables homeowners to select the level of water used each time the toilet is flushed — 1.6 gallons for bulk waste or .9 for liquid. The approach provides exceptional water savings paired with outstanding performance. A family of four can save more than $90 annually on their water bill, and $2,000 over the lifetime of the toilet.

If you replace a typical 2.5 gpm showerhead with a TOTO high-efficiency Trilogy Showerhead, you will experience the same luxurious shower, yet consume a responsible 14 gallons, saving 20 percent of the water used by older models.

Even something like a faucet can contribute to water savings. TOTO’s Silas Widespread Lavatory Faucet is a WaterSense labeled lavatory faucet that consumes a responsible 1.5 gallons per minute without sacrificing an ounce of performance. Its design has a classic contemporary elegance with a graceful, curved spout.

3. Be a trendy homeowner.

A whopping 68 percent of builders surveyed by the National Association of Home Builders say that energy-saving technologies and features including low-e windows, energy-efficient appliances and LED lighting will be common along with other green features like engineered wood products, and water-saving plumbing fixtures such as dual-flush toilets and low-flow faucets by 2015. Start now and you’ll be ahead of the curve.

Advertisement